Featured
Internship Civil engineering students (TU/FH) with focus on structural engineering SKI Ingenieurges. mbH is looking for interns who enjoy constructive and innovative tasks. We offer a varied and interesting internship in Hanover. Preference is given to students specialising in "structural engineering" in the higher semesters. This is an advantage but not a requirement. If you are interested in the profession
Frohe Feiertage Die SKI Ingenieurgestellschaft mbH wünschen Ihnen frohe und besinnliche Festtage. Genießen Sie die Zeit mit der Familie sowie Freunden und kommen Sie gut in das neue Jahr, welches recht viele Glücksmomente für Sie bereithalten möge. Wir stehen Ihnen im neuen Jahr ab dem 3. Januar wieder zur Verfügung. In dringenden Fällen wenden Sie
Masts and antennas Nowadays, hardly any classic transmission masts are erected, as the use of existing structures is usually sufficient for digital data radio. For example, available areas on the tubular towers or lattice masts of wind turbines are used for this purpose. Another possibility is to use wind turbines that have reached the end of their service life. In this case
Chimneys and stacks In the chemical industry with acidic or basic waste gases, tubular steel towers are used. In this case, either a coating of the structural steel prevents rapid corrosion or stainless steels are used as an alternative. The individual steel pipe sections are connected to each other via ring flange connections and fixed in the foundation by means of anchors. The design of the steel pipe sections for chimneys is
Earthquake simulation In regions with high earthquake accelerations, earthquakes can become the decisive load effect. Especially in the case of elevated structures such as silos and tank farms, this has a great influence on the frame construction. To determine the earthquake load, the construction is divided into individual mass points and the acceleration due to earthquake is applied. The acceleration is made up of the basic value of the ground acceleration,
Development of overhead line masts The overhead lines with their masts are the cores of the electrical power supply. The masts are mainly made of wood, concrete or steel and can have a variety of designs. For the high-voltage and extra-high-voltage grid (220kV and 380kV), steel lattice masts are usually used to allow for large heights and spans. The individual bars of these lattice-like masts are mainly made of hot-rolled angle steels, which can be
Current measures Due to the current Corona measures, we can mainly be reached by email. In urgent cases, please contact: contact@ski-consult.de Thank you and stay healthy! We hope that the situation will improve in the coming months and that we will be able to serve you again without restrictions. See also: SKI Ingenieurges. mbH
Measurement technology for a hybrid tower In the course of constructing a new prototype wind turbine as a hybrid tower, it was equipped with various measurement sensors. The aim of the sensors is to determine accelerations, temperatures and movements of the concrete shaft. Following the evaluation, conclusions are to be drawn about the construction and the load-bearing behaviour of the prototype. SKI Ingenieurges. mbH is
Installation of a 200m³ spent grains silo In the course of the modernisation of a local brewery, a finished spent grains silo was handed over to the end customer and installed. The Trebersilo with a diameter of 4m and a total height of approx. 26m has a capacity of approx. 200m³. The structural calculations for the silo, as well as the substructure with anchoring were carried out by the
Due to the current situation the SKI Ingenieurges. mbH is forced to go new ways. The health of our employees is our top priority. Due to our spatial situation and home office places it is possible for us to maintain regular operations and be there for our customers. All this without exposing our employees to danger.